Need a guide! -1 reply

Please wait...

Ire

Slightly cooler than a n00b

50 XP

30th August 2002

0 Uploads

33 Posts

0 Threads

#1 15 years ago

Does anyone know where to get a guide for using GTK radient:dropsjar:




yugi33

I don't spend enough time here

50 XP

27th November 2002

0 Uploads

18 Posts

0 Threads

#2 15 years ago

Yeah, it gets you started on the basics, but it was meant for JK2. Here. Creating Your First Room with GTKRadiant

-------------------------------------------------------------------------------- Author: JM

Every good editing site needs it. Yes, the infamous first room tutorial. I'm going to be quick and to the point.

Tools needed: GTKRadiant 1.1.1 or above Q3 (or RtCW or JO or EF or whatever)

Time for the nitty gritty. I'm going to assume that GTKRadiant is already set up. If it's not, you must not have installed it; it does just about everything for you. I understand that many of you might have a history editing Jedi Knight, and are used to JED - well, this is as different as you can get, people.

First, go to the 'texture' menu at the top and load up any texture set you want. The textures will show up in the texture picker box (If you haven't got one, go into Radiant's preferences and set it to the standard single view with extra windows tiled around it option.) Click on one of the textures to pick it.

Now, in the big 2D window click the left mouse button and hold it down as you drag it. Congratulations, you just made a brush. There are some major differences between this and a similar operation in JED (If you've never used JED, just ignore me.) First off, you just created a positive space; a 3do type object; not a sector. Sectors don't exist here. The player will walk ON this object, not IN it.

My brush Everything in the map must be enclosed; nothing can be exposed to the 'void'. In JED this wasn't an issue, because there was no void. To make this a room, we'll need walls and a ceiling. Press 'esc' to deselect your floor brush. Now, drag out a thin brush on each side of the floor brush. Hold shift while clicking a brush to select, and go ahead and select all four walls (Just hold shift and click on each of them) Now, press Ctrl+tab to switch to the first side view. Position the cursor above the highlighted brushes and drag upward to make the walls.

My walls

My walls after I made them bigger Only the ceiling left. Press ctrl+alt twice to get back to the top view, drag out your ceiling brush, switch to the side view, and adjust it appropriately. Almost a workable map! In the top view, right click and select 'info/player_deathmatch' from the list. Check all the views to make sure it's completely inside the room. You might have to adjust your room if you didn't make it big enough. A bit away from there, right click and select 'light'. Make sure thats inside too.

Now save it. That's always very important.

Compiling couldn't be simpler. Just go to the bsp menu and select 'bsp -vis -vlight'. Watch how fast that compiles. Don't get used to that, big maps can take days to compile. Start up whatever game you just compiled it for, and hit tilde to enter the console. Type '/devmap yourmapname' to play. If it says it can't find it, try entering '/sv_pure 0', then try it again. Remember; if your map file was 'myfirstmap.map', the bsp file is 'myfirstmap.bsp', and you should use '/devmap myfirstmap'. No .bsp!

Not pretty, but it gets the job done Cheers, JM

Copyright © 1998-2002 Respective Authors & The Massassi Temple




Ire

Slightly cooler than a n00b

50 XP

30th August 2002

0 Uploads

33 Posts

0 Threads

#3 15 years ago

Thanks Mate:rock: