Crashing within a few seconds of booting up and logging in. 3 replies

Please wait...

Jerry_03

[BFE-WaW]Jerry_03

50 XP

25th September 2004

0 Uploads

41 Posts

0 Threads

#1 9 years ago

Another one of my rigs is crashing within a few seconds of booting up and logging in.

First the system specs: CPU: Intel Pentium 4 Northwood @ 2.8GHz (Stock Clock) with Stock Heatsink & Fan Mobo: BIOSTAR P4M900M4 RAM: PNY Optima 2GB 240-Pin DDR2 667 Video Card: ATi Radeon HD 3650 512MB Sound Card: Intergrated - Realtek Audio ALC861VD TV Tuner: Leadtek Tuner Card TV2000XP Hard Drives: Western Digital Caviar 320GB 7200rpm SATA PSU: MSI TurboStream 500W OS: Windows XP Home SP2 32-bit

Now the problem: upon booting the system and logging in, it will crash usually within a few seconds of logging in. Though, sometimes it crashes after being logged in for a few minutes and sometimes it doesn’t even get to the login screen but crashes right after POST. Most of the time it crashes and there is what seems to be a 5 second long BIOS beep code. There isn’t a BIOS beep code all the time, sometimes it would just freeze and lock up. Sometimes it would even crash in safe mode. System restore works temporarily, as in, I do a system restore and it will work for 1 or 2 days then the problem would start again.

At first I ignored the beep code and assumed it was Windows, so I created a new partition on my hard drive and installed another instance of Win XP. I didn’t want to reformat because I still need time to backup my data. At first it seemed like it worked but soon, the problem started again, so I realized it wasn’t Windows or software related but probably hardware.

I then decided to open the case and clean the inside since I figured it might be an overheating issue. It wasn’t very dirty inside as I had just cleaned it a few months ago. I cleaned it yesterday with a can of compressed air and I also checked the connections and RAM and it seemed okay. So far it hasn’t been crashing, but I ain’t holding my breath.

Also using a program called Hardware Monitor I’ve been monitoring the temperatures and volts. The temperatures seem to be okay. As for the volts, I don’t know what to look for so I’ll post what it says: ITE IT87 hardware monitor Voltage sensor 0 1.52 Volts [0x5F] (CPU VCORE) Voltage sensor 1 1.63 Volts [0x66] (VIN1) Voltage sensor 2 3.26 Volts [0xCC] (+3.3V) Voltage sensor 3 5.05 Volts [0xBC] (+5V) Voltage sensor 4 12.10 Volts [0xBD] (+12V) Voltage sensor 5 -7.68 Volts [0x78] (-12V) Voltage sensor 6 -0.45 Volts [0x7] (-5V) Voltage sensor 7 4.68 Volts [0xAE] (+5V VCCH) Voltage sensor 8 3.30 Volts [0xCE] (VBAT) Temperature sensor 2 26°C (78°F) [0x1A] (TMPIN2) Fan sensor 0 5357 RPM [0x7E] (FANIN0)

Also just now I decided to look up the BIOS beeps and it seems it has something to do with the CPU or a process error. In the mobo manual it says it’s a CPU overheating issue. It says to remove the power cord from the PSU and wait a few seconds then plug it back and in a reboot or clear CMOS and then boot up. There are instructions in the manual how to clear CMOS but I’ve never done that before and I’m a bit nervous that it might cause other problems.

Also it should be noted that this CPU is pretty old, it’s from a Gateway system back in 2003. That computer’s mobo failed so I decided to reuse the CPU and bought this cheap Biostar mobo and put this rig together last summer. It’s been working fine until now. The CPU has never been OC’ed and I’ve always used the stock HSF. If more info is needed on the CPU I could post info from CPU-Z or something. As for airflow in the case, it’s not very good. I do have a 80mm front intake fan but there are no “grills” or openings in the front of the case to actually intake air. There is no rear exhaust fan. However the PSU has 2 80mm fans on it, the standard one facing the rear and one facing the CPU.

After typing all this I guess the problem maybe the CPU overheating but I’m sort of looking for a second opinion if I’m wrong. If it is indeed the CPU overheating I’m looking for advice on what to do, besides cleaning out the fan/heat sink and reapplying thermal paste. I’m not really sure if I should buy a new HSF for the CPU as this is a secondary rig and I’d rather save my money spending more on an old Pen 4 CPU. Also does anyone have any advice on improving airflow in the rig?




Cnidaria Rex Forum Mod

King Jellyfish

261,986 XP

10th September 2007

4 Uploads

21,772 Posts

1,756 Threads

#2 9 years ago

What kind of BIOS is it? i.e. AwardBios, Pheonix, AMI?

Since you said it had a 5 second long beep, here's a link to a chart that shows info on beeps, hope it helps:

http://www.computerhope.com/beep.htm


"I'd shush her zephyr." ~ Zephyr.



*The.Doctor

Trust me, I'm a Doctor

102,440 XP

25th November 2003

0 Uploads

9,964 Posts

0 Threads

#3 9 years ago

Sounds to me like you may have a ram stick going bad.

Try running Memtest86+ and see if you get any errors.




Jerry_03

[BFE-WaW]Jerry_03

50 XP

25th September 2004

0 Uploads

41 Posts

0 Threads

#4 9 years ago

I think its AwardBios, thanks for the link ill check it out.

And ill run Memtest86+ and tell you the results.