memory help 11 replies

  • 1
  • 2

Please wait...

xenmasta

I post to get attention

50 XP

6th January 2005

0 Uploads

76 Posts

0 Threads

#1 11 years ago

I want to update my ram, I have 512 I have not a clue what to buy, my stats are under, if you could post a link to new egg or something would be great thanks

General Information : U5 (Channel A0 ) : 256 MB - DIMM U6 (Channel A3 ) : 256 MB - DIMM

Information SPD EEPROM (U5) : Manufacturer : Infineon Part Number : 64D32020HDL6C Serial Number : 03186010 Type : DDR-SDRAM PC-2700 (166 MHz) - [DDR-333] Size : 256 MB (2 rows, 4 banks) Module Buffered : No Module Registered : No Module EPP : No Width : 64-bit Error Correction Capability : No Max. Burst Length : 8 Refresh : Reduced (.5x)7.8 µs, Self Refresh Voltage : SSTL 2.5v Prefetch Buffer : 2-bit Manufacture : Week 50 of 2005 Supported Frequencies : 133 MHz, 166 MHz CAS Latency (tCL) : 2 clocks @133 MHz, 2.5 clocks @166 MHz RAS to CAS (tRCD) : 3 clocks @133 MHz, 3 clocks @166 MHz RAS Precharge (tRP) : 3 clocks @133 MHz, 3 clocks @166 MHz Cycle Time (tRAS) : 6 clocks @133 MHz, 7 clocks @166 MHz

Information SPD EEPROM (U6) : Manufacturer : Infineon Part Number : 64D32020HDL6C Serial Number : 03186012 Type : DDR-SDRAM PC-2700 (166 MHz) - [DDR-333] Size : 256 MB (2 rows, 4 banks) Module Buffered : No Module Registered : No Module EPP : No Width : 64-bit Error Correction Capability : No Max. Burst Length : 8 Refresh : Reduced (.5x)7.8 µs, Self Refresh Voltage : SSTL 2.5v Prefetch Buffer : 2-bit Manufacture : Week 50 of 2005 Supported Frequencies : 133 MHz, 166 MHz CAS Latency (tCL) : 2 clocks @133 MHz, 2.5 clocks @166 MHz RAS to CAS (tRCD) : 3 clocks @133 MHz, 3 clocks @166 MHz RAS Precharge (tRP) : 3 clocks @133 MHz, 3 clocks @166 MHz Cycle Time (tRAS) : 6 clocks @133 MHz, 7 clocks @166 MHz

Memory Controller Information : Memory Controller : System Memory Location : Mainboard Error Correction Capability : No Number of connectors : 2 Max. Module Size : 4096 KB




Bs|Archaon

I would die without GF

50 XP

15th March 2006

0 Uploads

5,910 Posts

0 Threads

#2 11 years ago

If you want 1gb - http://www.newegg.com/Product/Product.asp?Item=N82E16820145439 If you want 2gb - http://www.newegg.com/Product/Product.asp?Item=N82E16820141214

Judging from the speed of the memory I assume it's quite and old system, so in my opinion you're better off going for 1gb and keeping the other $80. I'm not saying there's anything wrong with your system, just that there's probably not much point putting 2gb in it.




aaj111

The Internet ends at GF

50 XP

31st January 2007

0 Uploads

130 Posts

0 Threads

#3 11 years ago

1gig is good enough. I run about 700+ and it's great. If you have a card already, add 1gig to what you have for minimum costage...




rob.

I am the Walrus

50 XP

24th October 2004

0 Uploads

5,580 Posts

0 Threads

#4 11 years ago

I'd ditch the two 256 Dimms, and settle on a 1gb kit (2x512) (for dual channel purposes, mainly).

Like BS said, not much use pouring the money into a rather old system, no offence.




Bs|Archaon

I would die without GF

50 XP

15th March 2006

0 Uploads

5,910 Posts

0 Threads

#5 11 years ago

By the looks of things he only has two slots anyway, guys. :p




rob.

I am the Walrus

50 XP

24th October 2004

0 Uploads

5,580 Posts

0 Threads

#6 11 years ago

I've got to be more observant in future. :p




xenmasta

I post to get attention

50 XP

6th January 2005

0 Uploads

76 Posts

0 Threads

#7 11 years ago

Bs|Archaon;3520271If you want 1gb - http://www.newegg.com/Product/Product.asp?Item=N82E16820145439 If you want 2gb - http://www.newegg.com/Product/Product.asp?Item=N82E16820141214

Judging from the speed of the memory I assume it's quite and old system, so in my opinion you're better off going for 1gb and keeping the other $80. I'm not saying there's anything wrong with your system, just that there's probably not much point putting 2gb in it.

thanks, but I need "LAPTOP" memory if any one can post links to that

be great :)




Bs|Archaon

I would die without GF

50 XP

15th March 2006

0 Uploads

5,910 Posts

0 Threads

#8 11 years ago

Might've helped to post that little snippet of information earlier mate.

Two of these - http://www.newegg.com/Product/Product.asp?Item=N82E16820145484




Mastershroom VIP Member

Frag Out!

153,685 XP

18th November 2004

0 Uploads

14,196 Posts

0 Threads

#9 11 years ago

2x512MB FTW.

It's what I use and it works just great for me. I have a third RAM slot, though. I wanna put it to use.




aaj111

The Internet ends at GF

50 XP

31st January 2007

0 Uploads

130 Posts

0 Threads

#10 11 years ago

Wow, Three Slots? Dude, you could put 6GIGS in that thing! (With the 2gig cards...) in the future...




  • 1
  • 2