ram timings 1 reply

Please wait...

steelGrunt

I GOOGLED YOU & IT WASN'T GOOD

50 XP

19th October 2006

0 Uploads

96 Posts

0 Threads

#1 12 years ago

hello all, Well this is kinda a problem or maybe its just nothing but i downloaded everest program and was looking at my ram timings and what i notice was that one of my timings reads Field Value DIMM1: Elpida SyncMAX 1 GB DDR2-533 DDR2 SDRAM (5.0-4-4-12 @ 266 MHz) (4.0-4-4-12 @ 266 MHz) (3.0-3-3-9 @ 200 MHz) Field Value DIMM2: SUPERTALENT 1 GB DDR2-533 DDR2 SDRAM (5.0-4-4-11 @ 266 MHz) (4.0-4-4-11 @ 266 MHz) (3.0-3-3-8 @ 200 MHz) Field Value DIMM3: Elpida SyncMAX 512 MB DDR2-400 DDR2 SDRAM (4.0-3-3-8 @ 200 MHz) (3.0-3-3-8 @ 200 MHz) And for the most part its been running good but every now and then it boots me out of games and or just locks up could this be a problem and should i remove the stick of 512 and just use the other two?? thanks.




Oblivious

I tawt I taw a puddy tat...

50 XP

30th December 2002

0 Uploads

2,806 Posts

0 Threads

#2 12 years ago

I believe it's just reporting what the default timings are for each particular stick and that all three of them are running at 3.0-3-3-8 @ 200 MHz.

I would pull out the pc3200 stick just because it's slowing down your other 2gb of faster pc4200 memory (otherwise it runs at the pc3200 speed). You'd still be running 2gb which is plenty.