I am using a software called pirate radio to broadcast internet radio but i am using a router Linksys Capture("WRT54G")WRT54G and the manual says that if you are using a router:
If you are connecting one or more computers to the Internet with a router, you will need to configure the router to redirect Broadcaster traffic to the appropriate internal server (computer using the Broadcaster). In other words, computers on the internal network are assigned private IP addresses, and they connect to the Internet via the router’s public IP address. Incoming connections (to services like the Broadcaster) will be accepted by the router, which then needs to be configured to forward these requests to the appropriate private IP address. This configuration varies between brands and models of routers (look for “virtual server”, “forwarding”, or “NAT” in your routers documentation). Note that the Broadcaster uses protocol: TCP with default port 80.
I cannot find virtual server or nat or forwarding within the firmware. Any suggestions.
What does the Fox say?
23rd November 2002
Logon to the Linksys wrt54g router, and look for the "Applications & Gaming" section. Then select the "Port Range Forwarding" option.
Set the range of ports that will be used for Pirate Radio, and then on the right, assign your computer's IP as the destination.
Perfect! Thank you very much.