Desert Combat Problems. -1 reply

Please wait...

VonMeyer

Waiting for Forgotten Hope 2

50 XP

22nd October 2002

0 Uploads

2,212 Posts

0 Threads

#1 15 years ago

When ever i play a dc map the tanks ships planes etc etc end up being invisible. And the nades have no sound. I reinstalled dc twice and still everything is missing or doesnt show up. I hope dc fixes this asap because its quite getting on my nerves.




apocalypse_kid

I would die without GF

50 XP

20th May 2002

0 Uploads

5,498 Posts

0 Threads

#2 15 years ago

Hi Von,

It works fine in my machine, perhaps you have another mod installed that is causing problems with DC? Try removing other mods (I know it's a pain but it's the only way to be sure) then re-installing DC and see if that helps.

Good luck

:cya: :cya: :cya:

:smokin:




VonMeyer

Waiting for Forgotten Hope 2

50 XP

22nd October 2002

0 Uploads

2,212 Posts

0 Threads

#3 15 years ago

Only mods i have now is dc and merciless creations. Ever hear nvidias omega drivers? Could they be causing the problems?




apocalypse_kid

I would die without GF

50 XP

20th May 2002

0 Uploads

5,498 Posts

0 Threads

#4 15 years ago

Sounds like it could be, there are some suggested mobo settings ont he omega website that may help, here they are.

Fast Gate A20 Option : ENABLED Video BIOS shadowing : DISABLED Video BIOS cacheable : DISABLED xxxxx - xxxxx Shadow : ALL DISABLED IDE prefetch mode : ENABLED Init Display First : AGP or PCI (SELECT YOUR CARD TYPE) IDE HDD Block Mode : ENABLED IDE 32-bit transfer mode : ENABLED Assign IRQ for USB : DISABLED (UNLESS YOU USE USB DEVICES) Assign IRQ for VGA : ENABLED PCI/VGA palette snoop : DISABLED PNP OS Installed : ENABLED (UNLESS YOU WANT TO MANUALLY ASSIGN IRQ's) Resource Controlled By : AUTO (UNLESS YOU WANT TO MANUALLY ASSIGN IRQs AND DMAs) AGP aperture size : 128 AGP master 1 WS write : ENABLED*** AGP master 1 WS read : ENABLED*** Bank 0/1, 2/3 DRAM timing : TURBO*** CPU to PCI write buffer : ENABLED Delayed Transaction : ENABLED DRAM speculative leadoff : ENABLED*** DRAM Data Integrity Mode : NON-ECC (UNLESS YOU HAVE ECC MEMORY) Delay DRAM read latch : (THE LOWER, THE FASTER)*** Fast writes : DISABLED Memory parity/ECC check : DISABLED*** Passive Release : ENABLED PCI Concurrency : ENABLED PCI master 0 WS write : ENABLED*** RAS active time : (THE LOWER, THE FASTER)*** RAS to CAS delay : (THE LOWER, THE FASTER)** Read around write : ENABLED SDRAM Bank Interleave : 4-bank/way SDRAM CAS Latency Time : 2** SDRAM cycle length : 2** SDRAM Precharge control : ENABLED Spread spectrum (modulation): DISABLED System BIOS cacheable : DISABLED Video RAM cacheable : DISABLED 8 bit I/O Recovery Time : 1 16 bit I/O Recovery Time : 1 Turbo frequency : ENABLED

They're not officially supported so it's probably use at own risk.

Have fun

:cya: :cya: :cya:

:smokin:




VonMeyer

Waiting for Forgotten Hope 2

50 XP

22nd October 2002

0 Uploads

2,212 Posts

0 Threads

#5 15 years ago

Ok where can i find these settings.