This ship is the Freedom class from the battle of Wolf 359. It ha some minor flaws with the wireframes and the damage textures, but it works. It should actually be slower, because it has only one nacelle.
Freedom Class destroyer by Pizza the Hutt This ship is the Freedom class from the battle of Wolf 359 It has some minor flaws with the wireframes and the damage textures, but it works. It should actually be slower, because it has only one nacelle. Installation: ------------- Copy the file ffree1.sod into the SOD folder Copy the .tga files into the Textures > RGB folder Copy the file ffree1.odf into the ODF > ships folder Copy the file ffree1.bmp into the Bitmaps > Admiralslog folder Open the file fyard2.odf or fyard.odf (whichever shipyard you want the ship To be built from) and insert the line: buildItemXX = "ffree1" under build Parameters below the last ship to be build XX being the next unused number Save that file Open "tech 1" from the Techtree folder and insert this line: ffree1.odf 1 fyard2.odf // Freedom class Save this file, open "fulltech.tt" and insert the following line ffree1.odf 0 Then save and open "GUI_global.spr" from the sprites folder Then add this line under federation build buttons: b_ffree1 gbffree1 0 0 64 64 There is a wire frame, it is not perfect, but at least there is one just add this line into the gui global under wireframes @reference=128 @tmaterial=interface ffree1w1 fwfree1 40 0 40 40 ffree1w2 fwfree1 0 40 40 40 ffree1w3 fwfree1 40 40 40 40 ffree1w4 fwfree1 80 0 40 40 ffree1w5 fwfree1 0 0 40 40 Credits: The Saucer is from P81's Enterprise C, the neck is from the SFC II Constitution and the nacelle is from the stock Galaxy. Everything else done by Pizza the Hutt Thank you for downloading this ship. Have fun!!! Pizza the Hutt
There are no comments yet. Be the first!