IP List

Here is a useful tool for SH only, however it could be adapted for use in BT & AA. IP List 3.00 can list 32 server's for easy on...

Download

Uploading...
Do not refresh or leave this page!

File Description

Here is a useful tool for SH only, however it could be adapted for use in BT & AA.

IP List 3.00 can list 32 server's for easy on the fly connection. Once you start MOH SH it will open to the main game lobby where you will see the 32 new buttons I have added. If you have had my old IP Lists then you know they were designed off a pull down menu like the skin selection in the multiplayer options room. This was limited to a compressed .pk3 file so players without the knowledge as to change & recompress such files where unable to customize the old lists. Version 3.00 changes all that.

Please read the readme for full info, go download it, give it a try and leave some feed back.

Read More

Screenshots
Readme
	by unclebob 			Milwaukee, WI			03/10/2007		

	Hello all UB here & I got a useful tool for you! It Slices It Dices ........   
Yeah well ok maybe not but it works with MOH SH & could be adapted for BT & AA if needed

Huh you say, well check out the screenshots & check out the file if you still don’t get it.
==================================================================

IP List 3.00 can list 32 server's for easy on the fly connection. Once you start MOH SH it will open to the main game lobby where you will see
the 32 new buttons I have added. If you have had my old IP Lists then you know they were designed off a pull down menu like the skin  
selection in the multiplayer options room. This was limited to a compressed .pk3 file so players without the knowledge as to change & 
recompress such files where unable to customize the old lists. Version 3.00 changes all that

Before anyone starts crying! The reconnect button is Slider_V's idea. He said it was ok fo me to use it.  

After you have Downloaded this file & unzipped it you will find your self reading this I hope, If not you most likely don’t have a clue what your 
looking at & will fumble around in the files till they are corrupted & you will need to re download the file. (be sure to save your self the headache 
& erase the 1st one you corrupted)  OK! So I have changed it up a bit for those that don’t know how to open or compress .pk3 files by giving  
you the files in a referenced data file format. This means there is no more need to now how to extract or compress files, no more need to  
remember a file structure.

HOW TO USE!!!!!
Put the "USER_UB_IPlist_V3.00.pk3" the UBmenu.cfg & "UBmenu" folder into your MainTA folder. (It is important that they go in the mainTA folder as this version is only meant for MOH SpearHead.)

The IP list has 32 stock servers from the Midwest & other regions of the United States already listed, all of which can easily be changed in a matter of minutes.

Now that you have moved the files start MOH SH. You will see that the main game lobby has changed a lot. I made it so the IP List is king of the page, 
moving the single player load & save options to the single player map room through the first door on the right. through the second door you will see the
IP list as well, but slightly rearranged to fit.

HOW TO CHANGE IP ADDRESSES & BUTTON NAMES!!!!!!
To start copy the folder "UBmenu" to your desktop. THAT WAS COPY NOT CUT!  
this folder contains the .cfg or config files that the IP List looks at for its information

In the folder you will find "serv1con.cfg" - "serv32con.cfg" & "IP_Listings_UB.cfg"
Each of the serv#con.cfg files has a IP address in it that is linked to one of the 32 buttons of the IP List
the IP_Listings_UB.cfg file is used to change the names shown in game on each button
I would suggest trying the stock settings before you attempt to change anything that way you know how it works!!!

TO REDIFINE A BUTTON!!!!!!
Step One: Chose the button you want to change. (easiest way is to go in game & pick one that is curently named.)
Step Two: Go into the IP_Listings_UB.cfg find the same name in that list & remember or write down what button number it corresponds to.
Step Three: Edit the listed server name to your new server name. (18 too 20 characters is the max)
Step Four: open the corresponding serv#con.cfg file & edit the IP address to the new server's (You can add a reference at the bottom of the file so you know what button the IP is for.)

******************************************************************** Example follows!

// unclebob's Advanced IP List Version 3.001
// Put the full IP address for the server that corisponds to the Name you added to the button. Should look like this when done
// 	connect "0.0.0.0:12203"

	connect "213.244.180.35:12203"

// J. Girls 5 <=== memo as to which button
// This is for serv31 button

*******************************************************************Example Ends!

Everything that has // infront of it is an example & is NOT read by the game. 
There fore in the example above the only code that is read is ( connect &quot;213.244.180.35:12203&quot; ) the rest is just reffernce info.
Also on a side note you can add a password line ABOVE connect &quot;213.244.180.35:12203&quot; so you will join a private client slot on the server everytime you join

******************************************************************** Example follows!

// unclebob's Advanced IP List Version 3.001
// Put the full IP address for the server that corisponds to the Name you added to the button. Should look like this when done
// 	connect &quot;0.0.0.0:12203&quot;

	password noob
	connect &quot;213.244.180.35:12203&quot;

// J. Girls 5 <=== memo as to which button
// This is for serv31 button

*******************************************************************Example Ends!

OTHER FUNCTIONS!!!!!
Now I also added a easy reconnect button to the disconnected from server, server full, & all those types of screens (bottom center again)

Plus there is a white text box to type a password in if the server is locked that way you don’t need to open the console 
(You need to know the password for the server to use this option)
!!!!! Be sure to hit ENTER after typing the password in or it won't take !!!!!!
After you type the password & hit Enter then hit the reconnect button & you’re on your way 
No more fumbling in the console! Or searching for IP numbers
If I seem a bit direct don’t be offended I just want to be as clear as possible so you can make this file work for you. I can’t tell you how many  
MODs I have D/L only to find the readme to be nonsensical at best with little or no useful info.   

CONFLICT WITH OTHER MODs!!!!!!!!!!!!!!!!!!!!!!!!
I use an autoexec.cfg within the .pk3
If another mod is using the same file it may over write my file. To fix this add a bunch of zzzzzz to my .pk3 &quot;zzzzzzUSER_UB_IPlist_V3.00.pk3&quot;
this will force the game to read my file last & now over write the other mod. But what about the other mod you say.
unclebob has thought ahead. open the other mod & find the autoexec.cfg Open it with a text editor & find the code that starts the other mod.
Now add that code to my UBmenu.cfg file in your mainTA & save. There you go all fixed!

BAD THINGS HAPPEN!!!!!!!!!!!!!!!!!!!!!!!!!!
This is as always freeware so have fun. But if it goes bad & the magic smoke comes out Don't even try to blame me. 
after all I'm broke!

Read More

Comments on this File

There are no comments yet. Be the first!

Unclebob


50 XP


Registered 21st November 2004

14 Files Uploaded

Share This File
Embed File