Class 395 "Javelin" White Version (+Bonus Pink)

This is a reskin of the Class 395 Javelin into a what if livery, the original mockup that was in Ebbsfleet station was in White, so thought...

Download

Uploading...
Do not refresh or leave this page!

File Description

This is a reskin of the Class 395 Javelin into a what if livery, the original mockup that was in Ebbsfleet station was in White, so thought that I would make it like that (although with a few slight differences to make it more complete. Also included is a "pink" version that I did as a joke (mainly for Matt P)

SE-395-White.rwp - Is the White with Yellow Doors version, uses default passenger view.
SE-395-Pink.rwp - Is the Pink version, includes custom passenger view (meant as a joke - but included it anyway)

Requires - London to Faversham

The reskin is listed in the editor as follows.

Class 395 DPTS1 SEWhite
Class 395 DPTS2 SEWhite
Class 395 MS1 SEWhite
Class 395 MS2 SEWhite
Class 395 MS3 SEWhite
Class 395 MS4 SEWhite

Class 395 DPTS1 Pink
Class 395 DPTS2 Pink
Class 395 MS1 Pink
Class 395 MS2 Pink
Class 395 MS3 Pink
Class 395 MS4 Pink

Includes a non Driver Version of each Driver Carriage

Read More

Download 'SEJavelin-Reskin.zip' (11.94MB)

Screenshots
Readme
Installation

This package is provided in .rar compression format. To unpack, use Winrar, 7-Zip or similar and extract the .rwp package, putting it in an easily accessible place such as your desktop. This file can then be installed using the TS2019 Package Manager. 

-------------------------------------------------------------
Notes - 
-------------------------------------------------------------
SE-395-White.rwp - Is the White with Yellow Doors version, uses default passenger view. 
SE-395-Pink.rwp - Is the Pink version, includes custom passenger view (meant as a joke - but included it anyway)

Requires - London to Faversham - https://store.steampowered.com/app/222557/Train_Simulator_LondonFaversham_High_Speed_Route_AddOn/

-------------------------------------------------------------
Description
-------------------------------------------------------------

This is reskin of the Class 395 Javelin into a what if livery, the original mock up that was in Ebbsfleet station was in White, so thought that I would make it like that (although with a few slight differences to make it more complete. Also included is a "pink" version that I did as a joke (mainly for Matt P)

The reskin is listed in the editor as follows.

Class 395 DPTS1 SEWhite
Class 395 DPTS2 SEWhite
Class 395 MS1 SEWhite
Class 395 MS2 SEWhite
Class 395 MS3 SEWhite
Class 395 MS4 SEWhite

Class 395 DPTS1 Pink
Class 395 DPTS2 Pink
Class 395 MS1 Pink
Class 395 MS2 Pink
Class 395 MS3 Pink
Class 395 MS4 Pink

Includes a non Driver Version of each Driver Carriage

-------------------------------------------------------------
Instructions
-------------------------------------------------------------

Install the provided .rwp file using the TS2018 Package Manager which can be found by using the Utilities.exe at Steam\steamapps\common\railworks, then....

1, Extracting the AP File (Skip to step 2 if you have already done this)

Newer content from Steam is provided in an .ap file format which contains all of the relevant files. When installing modifications to this content, the required contents of this .ap file have to be unpacked first. This can be done in a number of ways, but I will give instructions using 7-Zip which can be obtained here, for free:  http://www.7-zip.org/  Other archivers such as WinRar should also perform the same task.

Navigate to Steam\steamapps\common\railworks\Assets\RSC\KentHighSpeed\  and right click on the KentHighSpeedAssets.ap file, navigate to 7-Zip and click Extract Here. This will then place all of the folders in their correct location and look exactly how the content used to. If you only want to extract the RailVehicles folder for the purposes of installing this reskin, right click, navigate to 7-Zip and Open Archive. You can then select the RailVehicles folder and drag it into the open folder.

1a - If you'd like the AP version - install the AP Version.rwp after the main RWP file in the same method above, either with Utilites or Zip. 

-------------------------------------------------------------
2, Copying over the GeoPcDx files
-------------------------------------------------------------

Copy the files from these locations (for SE Whte version)

Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Engine\Class395_DPTS1.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Engine\Class395_DPTS2.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Engine\Class395_MS1.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Engine\Class395_MS2.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Engine\Class395_MS3.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Engine\Class395_MS4.IGS

and paste this into the following location:-

Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\SEWhite\Class395_DPTS1.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\SEWhite\Class395_DPTS2.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\SEWhite\Class395_MS1.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\SEWhite\Class395_MS2.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\SEWhite\Class395_MS3.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\SEWhite\Class395_MS4.IGS

Copy the files from these locations (for Pink version)

Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Engine\Class395_DPTS1.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Engine\Class395_DPTS2.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Engine\Class395_MS1.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Engine\Class395_MS2.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Engine\Class395_MS3.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Engine\Class395_MS4.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Engine\Class395_PassengerView.IGS

and paste this into the following location:-

Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Pink\Class395_DPTS1.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Pink\Class395_DPTS2.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Pink\Class395_MS1.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Pink\Class395_MS2.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Pink\Class395_MS3.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Pink\Class395_MS4.IGS
Assets\RSC\KentHighSpeed\RailVehicles\Electric\Class395\Default\Pink\Class395_PassengerView.IGS

Go back to Assets\DTG\Class390Pack01

If this location contains a blueprints.pak file, delete this. Don't worry, a new one is created when the program is loaded.

Once in game, in order to place this new consist in a route, you need to activate the Class 390 in the object filter by selecting DTG\Class390Pack01

The reskin should now be listed in the editor as described above.

Credits

Original Class 395 model and textures by DTG
Tweaks to textures by Daniel Leach

© Daniel Leach 2018

Distribution - You may host this file anywhere, however if possible please let me know that you have hosted this file and also please give credit to me for the reskin :)

Also Thank you to Darren Porter for letting me use his format of Readme for the AP File instructions.

Read More

Comments on this File

There are no comments yet. Be the first!

Danny

Former - FileFront Network Administrator


80 XP


Registered 10th September 2002

32 Files Uploaded

Share This File
Embed File